|
GC Coatings Final Coat Description: Superior quality acrylic coating for general purpose, interior/exterior emulsion paint. |
 |
Colours Available:
See Colour Chart: click here >>>
6 Standard
Colours: White, Ivory, Cream, Sand, Peach and Toffee.
Almost any colour of choice can be tinted at your nearest dealer.
Product information:
- Pack size:
1L, 5L and 20L
- Spreading rate ± 8 square meters/L - depending on surface texture
- Water-based
- Matt finish
- Quick drying
- 5 - 7 year life expectancy provided the product is correctly applied
- 20 000 shrubs tested by independent laboratory
Surface Preparation:
Surfaces should be in sound condition, dry & free from loose material. Dirt and grease should be removed by washing with a warm detergent solution (sugar soap) and then rinsing with clean water. Allow to dry thoroughly. All areas to be sanded properly.
Lime washed and chalky surfaces should be thoroughly cleaned, sanded and primed with GC Coatings Bonding Liquid before painting.
Fill all
defects with the appropriate product. N.B. Prime seal and sand according
to instruction on the pack.
On porous surfaces thin the first coat up to 10% with water.
New plaster should be coated with GC Coatings First Coat.
Product application:
Stir before
use. Apply final coat evenly by brush, roller or airless spray.
Apply two coats to achieve completely obliteration.
Allow 4 hours drying time between coats.
Clean equipment with tap water.
Washability : Good (Wash with sugar soap)
Insure that the same batch is used, colour might differ from batch to
batch.